Industry
Hydrols B.V. industril pumping solutions are manufactured to the same API 674 standards.
This ensures all pump solutions are designed and manufactured to the highest quality to ensure reliable product solutions and increased longevity of supply.
it is possible for Hydrols B.V. to offer optimal pump designs for heavily corrosive and abrasive fluids in the chemical and related industries.
API 610
Hydrols B.V provides the answer to a wide variety of pumping problems from the most difficult liquefied gases at low temperatures, to equally difficult conditions of service of the petroleum industry where liquids have to be pumped at temperatures well in excess of their ignition point.
These “heavy duty” centrifugal pumps are designed for high duty industrial services under extreme temperature range from -100°C up to +450°C.
This ensures correct pump alignment under all conditions:
Pipe stresses are directly transmitted to the baseplate.
The pump is allowed to expand or contract freely
Technical data
Capacity [m3/h] |
1800m3/h (8000US g.p.m) |
Max. test pressure (Bar) |
80 ATM (1137 PSI) |
Max. temper (°C) |
-100°C up to +450°C (-148 to +840 °F) |
HORIZONTAL
Centrifugal Pumps
Our selection of horizontal centrifugal pumps in single-stage or multi-stage design for several applications.
Handling of contaminated, chemically neutral or aggressive liquids with up to 10% solids
Tailormade solutions are available as below:
Fields of application
Technical data
Pump size |
1 ¼" to 12" |
Max. pressure |
580 PSI |
Max. flow |
11000 gpm |
Total head |
Up to 1300 ft |
Rotating speed |
To 3600 rpm |
Materials
Available in almost any metallic material designs from cast Iron to super duplex stainless steel
The materials are carefully selected depending on the application. The pump medium and the combinations of materials adapted to the respective conditions of use.
VERTICAL
Multi- and single stage pumps
Our selection of vertical centrifugal pumps for applications in various fields
Vertical mixed flow pump designed for desalination plants to work as intake pump
Handling of abrasive and corrosive liquids
Suitable for a wide flow range
Fields of application
Technical data:
Pump size |
6" to 40" |
Max pressure |
115 PSI |
Max flow |
55000 gpm |
Total head |
Up to 180 ft |
Rotating speed |
To 1800 rpm |
Material:
All wetted parts (except shaft) are made of metal free material to avoid corrosion totally.
Different shaft materials are available according to the application requirements
All hydraulic parts and the discharge bend are manufactured in SIC cast. Anti-corrosion lifetime guarantees for all SIC cast parts in seawater applications.